coating hot melt adhesive compound machine

Date:2019/3/20 11:09:43 / Read: / Source:本站

 PE Extrusion casting breathable film lamination with non-woven fabric machine

Production line speed: 100-150m/min Product width: 1500mm-2000mm

Product: Roofing materials, building materials

Overview: The raw materials are granulated by a twin-screw granulator. After drying and directly feeding to the extruder for extrusion, it can be extruded in single or three layers. Casting and then passing through the MDO uniaxial stretching unit stretched and heat set, and the stretched breathable film is directly thermally composited with the front and back two-layer non-woven fabric, and is wind into a large roll. Breathable film trimming and online recycling device ensures the rational use of raw materials, and the large rolls are printed ,dried and then rewind into small rolls.

Application: Roof waterproof and breathable composite film.




100# Protective cloth use coating hot melt adhesive compound machine

110# Protective cloth use coating hot melt adhesive compound machine

120# Protective cloth use coating hot melt adhesive compound machine

130# Protective cloth use coating hot melt adhesive compound machine

140# Protective cloth use coating hot melt adhesive compound machine

150# Protective cloth use coating hot melt adhesive compound machine

160# Protective cloth use coating hot melt adhesive compound machine

170# Protective cloth use coating hot melt adhesive compound machine

180# Protective cloth use coating hot melt adhesive compound machine









Author:admin


Phone now 13986280012 OR More contact information →

Go To Top